JSP Face Fit Testing Kit BPT050-000-000

JSP face fit testing kit can be used on what are defined as tight fitting respirators, with the exception of full face masks.

Qualitative face fit testing can be used not only as a testing method to ensure your employees are properly protected, but also as a very effective way of training them in the correct way of fitting a mask. Dust and half-masks commonly fail to do the job they are intended to do because of poor fitting and care by the user.

The seal between the face and the edge of the mask is the most common problem area. You will also see users using a mask after having kept it on their head or hanging round the neck.

The test employs a hood to create a small test chamber around the users head, and a test solution, this test solution has a bitter taste. It is the same type of solution that is put on childrens toys and fingernails to stop them chewing them.

The kit should test 50+ people and contents: 1x Instruction Manual, 1x Test Hood, 10x Test Report Forms, 2x Botles of Solution (1 Sensitivity, 1 Fit Test), 2x Nebulizer (1 Sensitivity, 1 Fit Test) 2x Sets of Nebulizer Inserts